Description

FREE fast shipping for USA. International delivery may take longer.

Magneto Generator Engine Stator Coil For Can-Am Quest 500 2×4 4×4 XT 2002-2004 Quest 650 4X4 XT 2002-2003 2004

FEATURES:
Direct replacement to your original unit
Plug-and-play, direct fit, easy installation.
Highest grade lamination materials.
Highest grade copper windings, resistant to 200 degrees Celsius.
Pick up pulsar coil included.
Connector included.
All products shipped are tested.

SPECIFICATIONS:
Condition: Aftermarket 100% Brand New
Quanity: 1PC
Type: Generator Stator Coil
Replacement Part Number:420296325

Dimensions :
Interior diameter : 53mm / 2.10″
Exterior diameter : 115mm / 4.52″
Thickness : 15mm / 0.58″

Other specifications :
Number of wires: 6
Number of pins: 6
Number of plugs: 1
Number of fixation holes: 6(+2)

FITMENT:
For Can-Am Quest 500 2×4 2003
For Can-Am Quest 500 4×4 XT 2002-2003
For Can-Am Quest 500 4X4 2002-2004
For Can-Am Quest 650 4X4 2002-2004
For Can-Am Quest 650 4×4 XT 2002-2003

PACKAGE INCLUDED:
1x Generator Stator Coil

NOTICE:
Before installing your new stator

Check the AC output of the stator.
Replace any burned or corroded connectors on stator and regulator/rectifier.
Check and repair any melted wiring.
Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation.

All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.