Description
Includes Fueling® High Flow billet camplate made from 7075 aluminum which is 50% harder and stronger than the factory or Feuling® OE+ camplatesIncreases oil flow and volume by enlarging the oil pump reservoirs and critical oil passages including matching the oil portholes throughout the camplate to the portholes in the engine case which increases engine oil flow to the lifters, piston cooling jets, crankshaft and rod bearingsFeuling® oil pumps are bench tested, the relief valve is seated and sealed to a minimum of 30 psi with full pop off at 55-60 psiIncreased oil volume from the larger gears and properly sized passages along with the pressure relief valve seat and seal from these oil pumps is essential for proper oiling system functionFueling® oil pump and camplate combination eliminate common pressure and scavenge issues associated with the factory oiling systemsFeuling® M-Eight oil pumps have the groove machined on the back cover to accept the factory crank bearing sealQuieter and smoother engine operationIncrease oil pressure, scavenge volume and engine oil flow42% more scavenge volume with port sizing, matched passages and holes to the engine case68% more oil volume to the crankshaft and connecting rod bearingEngine temperatures run 15°-25° coolerOil temperatures run 15°-30° cooler10-30 more psi of oil pressureReduces wet sumping, blowby and oily air cleanersTest results show 2 HP gain and 2 ft/lbs of torque gain to the rear wheel on M-EightIncludes billet 6061 aluminum high volume oil pump, High Flow camplate, HP+® Hydraulic roller lifters, cam installation kit, cam bearing, cam/crank bolts and washers, engine and fastener assembly lubeMade in the USAOptional Feuling® X ARP bolt kit available for the High Flow camplate PART 0932-0192 and HP+ or RS oil pump combo. See PART 2401-0993, optional ARP oil pump bolts do not use washers.Optional Feuling® X ARP oil pump/camplate bolt kit available PART 2401-0993.Feuling® test results show as much as 50% reduction of engine sump oil level.M-Eight engines must check clearance on front exhaust lifter to camshaft flange fit.SpecsProduct NamePump KitTypeOil SystemStyleChain Drive / Gear DriveModelHP+®Color/FinishRedMaterialAluminumUnitsKitRiding StyleStreet
